Kaeser Showcases Compressed Air Solutions for the Chip Industry at SEMICON

Anzeige Druckluft | Messen und Veranstaltungen | Digitisation | Created by BA

At SEMICON Europe in Munich, Kaeser Kompressoren will be presenting practical solutions for chip production in Hall C1, Booth 429. The focus is on Class 0-certified compressed air, energy-efficient generation, and components for low pressure dew points in sensitive semiconductor processes.

In the semiconductor industry, process stability and a sustainable reduction in the total cost of ownership (TCO) are among the key factors for success. Since the continuous supply of Class 0-certified compressed air consumes significant amounts of energy, efficient generation has a direct impact on ongoing operating costs. This applies to high-end logic manufacturing as well as the production of power semiconductors.

Networked Operation of Compressed Air Stations

With the Sigma Air Manager 4.0, Kaeser introduces a cross-machine control and management module for compressed air or blower stations. The integrated software ensures that multiple compressors, blowers, dryers, or filters are operated in an energy-efficient manner. The Kaeser Sigma Network enables comprehensive monitoring and energy management as well as predictive maintenance measures.

Oil-free compressed air and low pressure dew points

The CSG series of oil-free screw compressors is designed to meet the sensitive requirements of the semiconductor industry. It delivers compressed air with residual oil class 0 according to ISO 8573-1 for applications in wafer manufacturing, lithography, and pneumatic handling in cleanrooms. IE5 synchronous reluctance motors and the Sigma Profile are designed to contribute to energy-efficient operation. The water-cooled option with i.hoc and heat recovery makes dual use of waste heat.

In addition, Kaeser is introducing the Calosec series of heat-regenerating adsorption dryers. They are designed for compressed air networks with extremely low pressure dew points, down to −40 °C as standard and optionally down to −70 °C (Class 1 according to ISO 8573-1). The Calosec Control system with system monitoring ensures operational reliability.

The cold-regenerating adsorption dryers of the i.dc series also enable stable pressure dew points down to −40 °C or, optionally, down to −70 °C (Class 1 per ISO 8573-1). The dryers are designed to work with Kaeser compressors and are intended for applications in lithography, etching, and pneumatic wafer handling.

Activated Carbon Adsorbers for Technically Oil-Free Compressed Air

The ACT series activated carbon adsorbers are designed for the continuous supply of technically oil-free compressed air. When used after drying and pre-filtration, they meet the requirements of Class 1 per ISO 8573-1 with a residual oil content of ≤ 0.01 mg/m³. The service life of the activated carbon is up to 12,000 compressor operating hours. A standard oil indicator provides early warning of potential operational malfunctions.

Back